Bearing

ניסיון
מקצועיות
ואיכות ללא פשרות

פיתרונות טכנולוגיים
מתקדמים
למגוון ישומים
וענפי תעשייה

איכות זה אנחנו
מוצרים, שירות ותמיכה

היצרנים המובילים
בעולם
,בתחומי ההנדסה
,מחקר ופיתוח
ותהליכי יצור
מתקדמים

ביצועים
מציבים
את הלקוח
צעד אחד
לפני כולם

רכיבי הנעה מדויקים




מיסבים למכונות הזרקה

לצורך ייצור רכיבי פלסטיק עם דיוק גיאומטרי גבוה, ישנה כיום דרישה גוברת עבור מכונות הזרקה המונעות על ידי מערכות חשמל.

לדוגמא, מכבש חשמלי נחשב ליעיל יותר מאשר מכבש הידראולי, הוא נקי יותר ומצריך פחות אנרגיה. דרישה ופתרון זה עולים בקנה אחד עם הדרישה לספק מענה למצוקת איכות הסביבה.

עם המעבר למכונות הזרקה חשמליות, עלתה גם הדרישה בתעשייה לאמינות חסרת פשרות בתנאי סביבה תובעניים יותר.

חברתNSK פיתחה סדרה של מוצרים מיוחדים העומדים בעומס גבוה והמהווים נדבך חיוני למערכות הנעה, לדוגמא:

  • גליל הזרקה
  • גליל הצמדה (תבנית)
  • ציר הזרקה ( פליטה)
  • גליל מכבש
  • יחידת יצירת פלסטיקה

ניסיון וטכנולוגיה של NSK

כאשר בוחנים את ההיסטוריה של מכונות הזרקה, בשנת 1996 NSK השיקה את דגם HTF של מיסבים הנעה ליניארית למהירויות ועומסים גדולים במיוחד, דבר אשר אפשר הגברת העומס במכונות.

בשנת 2000 , חברת NSK הצהירה על השקת סדרה חדשה של מיסבים כדוריים זוויתיים על מנת לתמוך בסדרת הHTF . סדרה מיסבים חדשה זו אפשרה עבודה במהירויות גבוהות יותר והקלה באופן משמעותי על הליך ההתקנה בהשוואה למסבים כדוריים.

מאז השדרוג לסדרת NSK TAC03 ב 2013 , המיסבים הזוויתיים מהווים את הבחירה המועדפת לתמיכה בבורגי הנעה כדוריים.

בשנת 2007 השיקה חברת NSK אטם “grease-sealed high-speed, high-load A1 seal” , זאת כמענה למצוקת איכות הסביבה, ובכך תורמה רבות לעתיד שיפורי איכות הסביבה ולהפחתה בשימוש של חומרי סיכה.

NSK BALL SCREWS
בורגי הנעה ליניארית

NSK’s Ball Screw is produced from the latest tribology (friction control technology), and boasts the world’s top level production volume due to excellent production technology and quality control.
It is also used in machine tools, general machines such as injection molding machines and conveyors, and in special environments such as semiconductor and FPD manufacturing equipment.
We are contributing globally to development.

NSK LINIER GUIDES
מסילות ורוכבים להנעה ליניארית

NSK Linear Guide manufactured by production technology pursuing high precision and high quality is Machine tools
semiconductor manufacturing equipment, with a wide lineup including ball guides and roller guides We respond speedily to various requests such as general industrial equipment and medical use.

Cylindrical Roller Bearings – EW Series
מיסב גלילים סדרת EW

  • High radial load capacity
  • High speed applications
  • High strength pressed steel, machined brass or polyamide cage
  • Low noise & heat generation

Ball Screw Support Bearings
מיסב לחץ זוויתי לבורג כדורי

High-precision angular contact thrust ball bearings for precision ball screws are designed for a wide variety of applications with a range of high rigidity and high load capacity series available.

Single Row Deep Groove Ball Bearings – HR Series
מיסב כדורי מסדרת HR

  • Special internal design
  • Bigger rolling elements.
  • Increased dynamic load rating
  • Increased life in operation
  • Interchangeable with the standard range
  • Extra clean Z steel as standard

Angular Contact Ball Bearings
מיסב כדורי זוויתי (חצי-לחץ) בעל שורה אחת

NSK’s comprehensive range of angular contact ball bearings has been designed to meet the ever-evolving requirements of equipment manufacturers.
Angular contact ball bearings feature a contact angle that sustains significant axial loads in one direction at the same time as radial loads.
Since an axial component is generated when radial load is applied, these bearings are typically used in pairs or multi-bearing sets.

Thrust Ball Bearings
מיסבי לחץ (כדורי / גלילי)

Thrust ball bearings are designed to take axial (thrust) loads at high speeds, but they cannot take any radial loads.
These bearings feature bearing washers with raceway grooves in which the balls move.

Needle Roller Bearings
מיסבי מחטים

Needle roller bearings (sometimes called “needle bearings”) use long and narrow cylindrical rollers that sometimes exceed JIS/ISO size ranges.
They are categorized as thrust or radial bearings based on which load direction they support.
Radial types include drawn-cup and solid types, as well as application-specific track rollers (cam and roller followers).
Thrust needle and thrust roller bearings respond to axial load needs.

Spherical Roller Bearings
מיסב גלילים מתכוונן (ספריקלי)

Spherical roller bearings are available in EA, C, CD, and CA types designed for high load capacity. Types EA, C, and CD have pressed steel cages, while CA uses machined brass cages.
All EA types are high-performance standard NSKHPS Series bearings.
NSKHPS Series bearings have especially high load capacity, high limiting speeds, and excellent performance at temperatures up to 200°C.

Tapered Roller Bearings
מיסב גלילים קוני

  • Inch & metric sizes
  • Standard steel / carburised steel / HTF treatment
  • Custom-made sets with spacers

Cylindrical Roller Bearings
מיסב גלילים

Cylindrical roller bearings (CRBs) have a simple structure with their cylindrical rollers in linear contact with the raceways.

They offer high load capacity under primarily radial loads.
Low friction between the rollers and ring ribs makes these bearings suited for high speed rotation

מיסבים לעשיית הפלדה והמתכת

בתעשיית הפלדה והמתכת נעשה שימוש רחב במגוון מיסבים, וברכיבי הנעה המשמשים לאורך כל תהליך הייצור, לרבות באזור אחסנת חומרי גלם, הערגול והעיבוד הסופי.

סביבת העבודה של המיסבים בתעשיית הפלדה מצריכה התמודדות עם תנאי עבודה קשים ותובעניים במיוחד, כגון התמודדות עם זיהומים (אבקת פלדה), מים, חום גבוה.

המיסבים ורכיב ההנעה כגון בורגי הנעה כדוריים ומסילות הנעה, נחשפים לעומסים גבוהים, רעידות, הלמים, מהירויות עבודה משתנות הכוללות תאוצות ותאוטות דרסטיות.

כל אלה מייצרים סביבת עבודה תובענית במיוחד אשר אינה דומה ליישומים אחרים ולפיכך מצריכה דרכי התמודדות מיוחדות באמצעות שימוש בטכנולוגיה גבוהה ובניסיון רב.

חברת NSK בין היתר, פועלת רבות בשיפור התפעול והייצור בתעשייה זו, באופנים הבאים:
– יישום ושימוש של מיסבים מיוחדים.
– פיתוח מתמיד לשיפור חומרי גלם, חומרי סיכה ואנליזות פיתוח.

חברת NSK מציעה מגוון מיסבים לתעשיית המתכות, החל מפריטים סטנדרטים מתקן ISO ועד לרכיבי הנעה בפיתוח עצמי ובעלי יכולות גבוהות במיוחד ומאפיינים התואמים את הדרישות המחמירות של ענף תעשייה זה.

NSK ניסיון וטכנולוגיה

בסביבת העבודה הדינאמית של תעשיית ייצור מתכות, ערגול מהווה הליך יצורי נפוץ למדי.
בתהליך זה, מתכת לוהטת נמעכת בין מערגלות, אשר הופכות אותה לדקה וארוכה יותר.
זהו הליך חשוב ביותר ובעל השפעה רבה על איכות התוצר הסופי.
בשני צידי המערגלות קיימים לרוב מיסבים כדוריים זוויתיים בעלי 4 שורות אשר מתוכננים לשאת את העומסים הכבדים (special angular contact ball bearings), לרבות עמידה בחשיפה בפני נוזל הקירור ונשורת עיבוד מתכת.

חברת NSK פעלה רבות לאורך השנים על מנת להגדיל בצורה משמעותית את תוחלת החיים של המסבים ושל רכיבי ההנעה השונים, לרבות מסילות הנעה מדויקות ובורגי הנעה כדוריים מדויקים.

בשנות ה70 החברה פתחה לראשונה בעולם Sealed-Clean™ מיסבים כדוריים זוויתיים בעלי 4 שורות המצויידים באטימה בפני נוזלים והמונעים כניסתם של מים ונשורת עיבוד שבבי.
פיתוח זה האריך רבות את תוחלת חיי המיסבים.

בנוסף, חברת NSK השיקה חומרי סיכה מיוחדים, כבר בשנות ה 90 ובכך העלתה את יכולת העמידה של המיסבים בעומסים גבוהים ולרבות באמצעות שיפור בתכן.

NSK מכוונת להמשיך ולהיות חברה מובילה עולמית אשר זוכה לאמון ולמוניטין רב ממגוון לקוחותיה, ופועלות רבות על מנת להמשיך ולקדם את צורכי הלקוחות בתעשייה מורכבת זו.

Ball Bearing Units
בתי מיסב

NSK ball bearing units combine a bearing, housing, and sealing components into a standardized form used in the key parts of equipment.
They are versatile and easy to use.
Using a ball bearing unit simplifies the surrounding structure and makes mounting and maintenance more efficient.
As they provide the proper alignment, bearing units help prevent moment loads caused by mounting error.
Bearing units can also be easily mounted on the machine base or side walls so they can be used in all kinds of places, including frame structures.

Thrust Roller Bearings
מיסבי לחץ (כדורי / גלילי)

Available with cylindrical or spherical rollers, NSK’s thrust roller bearings sustain only axial loads, but are suitable for heavy loads and offer high axial rigidity.

Spherical roller thrust bearings contain convex rollers that make them self-aligning and unaffected by mounting error and shaft deflection.
Machined brass cages come standard, though the E-type uses a pressed steel cage for higher load capacity.

Cylindrical Roller Bearings – EW Series
מיסב גלילים סדרת EW

  • High radial load capacity
  • High speed applications
  • High strength pressed steel, machined brass or polyamide cage
  • Low noise & heat generation

Ball Screw Support Bearings
מיסב לחץ זוויתי לבורג כדורי

High-precision angular contact thrust ball bearings for precision ball screws are designed for a wide variety of applications with a range of high rigidity and high load capacity series available.

Single Row Deep Groove Ball Bearings – HR Series
מיסב כדורי מסדרת HR

  • Special internal design
  • Bigger rolling elements.
  • Increased dynamic load rating
  • Increased life in operation
  • Interchangeable with the standard range
  • Extra clean Z steel as standard

Angular Contact Ball Bearings
מיסב כדורי זוויתי (חצי-לחץ) בעל שורה אחת

NSK’s comprehensive range of angular contact ball bearings has been designed to meet the ever-evolving requirements of equipment manufacturers.
Angular contact ball bearings feature a contact angle that sustains significant axial loads in one direction at the same time as radial loads.
Since an axial component is generated when radial load is applied, these bearings are typically used in pairs or multi-bearing sets.

Thrust Ball Bearings
מיסבי לחץ (כדורי / גלילי)

Thrust ball bearings are designed to take axial (thrust) loads at high speeds, but they cannot take any radial loads.
These bearings feature bearing washers with raceway grooves in which the balls move.

Needle Roller Bearings
מיסבי מחטים

Needle roller bearings (sometimes called “needle bearings”) use long and narrow cylindrical rollers that sometimes exceed JIS/ISO size ranges.
They are categorized as thrust or radial bearings based on which load direction they support.
Radial types include drawn-cup and solid types, as well as application-specific track rollers (cam and roller followers).
Thrust needle and thrust roller bearings respond to axial load needs.

Spherical Roller Bearings
מיסב גלילים מתכוונן (ספריקלי)

Spherical roller bearings are available in EA, C, CD, and CA types designed for high load capacity. Types EA, C, and CD have pressed steel cages, while CA uses machined brass cages.
All EA types are high-performance standard NSKHPS Series bearings.
NSKHPS Series bearings have especially high load capacity, high limiting speeds, and excellent performance at temperatures up to 200°C.

Tapered Roller Bearings
מיסב גלילים קוני

  • Inch & metric sizes
  • Standard steel / carburised steel / HTF treatment
  • Custom-made sets with spacers

Cylindrical Roller Bearings
מיסב גלילים

Cylindrical roller bearings (CRBs) have a simple structure with their cylindrical rollers in linear contact with the raceways.

They offer high load capacity under primarily radial loads.
Low friction between the rollers and ring ribs makes these bearings suited for high speed rotation

שניצקי ארצי בע”מ – מיסבים ורכיבי הנעה לתעשיית טורבינות רוח ואנרגיה ירוקה

טורבינות רוח מהוות למעשה מכונות עצומות העושות שימוש באנרגיה מתחדשת.
ישנן לדוגמא טורבינות רוח אשר מייצרות 2 מגה וואט, בעלות להבים באורך 40 מטר ומרכז מנוע בגובה 60-100 מטרים.
משקלן הכולל הוא מעל 200 טון, ובהתאם לכך על המיסבים המשמשים בטורבינות רוח להיות בעלי מבנה גדול במיוחד, בעלי קוטר פנימי בין 100-700 מ”מ ובמקרים חריגים אפילו 2000 מ”מ
גם בישראל מותקנות טורבינות רוח באזורי מותאמים וקיימת התקדמות משמעותית לעבר שימוש במקורות אנרגיה מתחדשות לרבות, אנרגיה סולארית.
מעט יצרנים בעולם מסוגלים לתמוך באספקה סדירה של מיסבים בסדרי גודל ובאיכות הנדרשת לתחום זה.

ניסיון וטכנולוגיה

היות וטורבינות הרוח אינן נגישות באופן קל לתחזוקה מכאנית שוטפת, המיסבים ורכיבי ההנעה צריכים להיות בעלי אמינות גבוהה במיוחד.
תנאי הסביבה אינן פשוטים, באקלים החיצוני בגובה של מעל 100 מטרים עם דרישת תוחלת חיים של 20 שנה, טורבינות רוח על רכיביהן מיועדות לעמידות גבוהה.
חברת NSK מתכננת מיסבים לטורבינות רוח, תוך שימוש בתוכנות פיתוח, הדמיה ושימוש בידע ובניסיון הנרחב של החברה בטיפול תרמי ובחומרים מיוחדים. בנוסף המסבים עוברים בדיקות איכות המדמות עבודה בתנאים אמיתיים.

Cylindrical Roller Bearings – EW Series
מיסב גלילים סדרת EW

  • High radial load capacity
  • High speed applications
  • High strength pressed steel, machined brass or polyamide cage
  • Low noise & heat generation

Ball Screw Support Bearings
מיסב לחץ זוויתי לבורג כדורי

High-precision angular contact thrust ball bearings for precision ball screws are designed for a wide variety of applications with a range of high rigidity and high load capacity series available.

Single Row Deep Groove Ball Bearings – HR Series
מיסב כדורי מסדרת HR

  • Special internal design
  • Bigger rolling elements.
  • Increased dynamic load rating
  • Increased life in operation
  • Interchangeable with the standard range
  • Extra clean Z steel as standard

Angular Contact Ball Bearings
מיסב כדורי זוויתי (חצי-לחץ) בעל שורה אחת

NSK’s comprehensive range of angular contact ball bearings has been designed to meet the ever-evolving requirements of equipment manufacturers.
Angular contact ball bearings feature a contact angle that sustains significant axial loads in one direction at the same time as radial loads.
Since an axial component is generated when radial load is applied, these bearings are typically used in pairs or multi-bearing sets.

Thrust Ball Bearings
מיסבי לחץ (כדורי / גלילי)

Thrust ball bearings are designed to take axial (thrust) loads at high speeds, but they cannot take any radial loads.
These bearings feature bearing washers with raceway grooves in which the balls move.

Needle Roller Bearings
מיסבי מחטים

Needle roller bearings (sometimes called “needle bearings”) use long and narrow cylindrical rollers that sometimes exceed JIS/ISO size ranges.
They are categorized as thrust or radial bearings based on which load direction they support.
Radial types include drawn-cup and solid types, as well as application-specific track rollers (cam and roller followers).
Thrust needle and thrust roller bearings respond to axial load needs.

Tapered Roller Bearings
מיסב גלילים קוני

  • Inch & metric sizes
  • Standard steel / carburised steel / HTF treatment
  • Custom-made sets with spacers

Spherical Roller Bearings
מיסב גלילים מתכוונן (ספריקלי)

Spherical roller bearings are available in EA, C, CD, and CA types designed for high load capacity. Types EA, C, and CD have pressed steel cages, while CA uses machined brass cages.
All EA types are high-performance standard NSKHPS Series bearings.
NSKHPS Series bearings have especially high load capacity, high limiting speeds, and excellent performance at temperatures up to 200°C.

Cylindrical Roller Bearings
מיסב גלילים

Cylindrical roller bearings (CRBs) have a simple structure with their cylindrical rollers in linear contact with the raceways.

They offer high load capacity under primarily radial loads.
Low friction between the rollers and ring ribs makes these bearings suited for high speed rotation

מיסבים לרכבות

חברת NSK בין היתר מפתחת ומספקת מגוון מיסבים ורכיבי הנעה לשימוש ברכבות, עבור צירי גלגלים, מערכות הנעה, ומנועים.

מיסבים לתחום זה מצריכים בין היתר רמת אמינות גבוהה ביותר לצד ביצועים גבוהים, ואמינות יוצאת דופן הנדרשת לפרקי זמן ארוכים מאוד עם מינימום תחזוקה. כל זאת במטרה לאפשר לרכבות לפעול בצורה אמינה, יעילה ורציפה.

מיסבי NSK מוטמעים בין ביתר ברכבות המהירות והמשוכללות ביותר ביפן (Bullet Trains חב’ שינקסן) החל מהסדרה הראשונה ועד האחרונה.

חברת NSK מספקת מיסבים לחברת הרכבות שינקסן (Shinkansen bullet trains) בעלי סיכוך גריז עם אטמים וסיכוך אמבט שמן.

מאחר ומיסבי צירי הגלגלים הינם מהותיים לבטיחות הנסיעה ותפעול הרכבות, NSK ציידה מיסבים אלו בחיישנים מיוחדים המספקים בקרה ומידע שוטף אודת מצבם המכאני.

כמו כן, מיסבי הגלילים הקונים הינם בעלי תוחלת חיים אפקטיבית ארוכה ביותר.

מערכות ההינע מצריכות התמודדות שוטפת עם רעידות חזקות ועומסים גבוהים במיוחד, דבר אשר מחייב מיסבים אלו לעבור טיפול תרמי-כימי ניטרידי לצורך חיזוק כלוב המיסב והגברת העמידות בפני כשל.

ככל שחולף הזמן, הרכבות המודרניות הופכות ליותר מהירות ועל מנת לתמוך בקצב התקדמות בתעשייה זו, חברת NSK מפתחת מיסבים גליליים במיוחד עבור מערכות ההנעה המורכבות בהן נעשה שימוש ברכבות.

בנוסף מפתחת NSK כלובי מיסב בעלי תכונת תיעול של החומר הסיכוך במסב, דבר אשר מאפשר להאריך את משך העבודה והתפעול ללא תחזוקה.

Thrust Roller Bearings
מיסבי לחץ (כדורי / גלילי)

Available with cylindrical or spherical rollers, NSK’s thrust roller bearings sustain only axial loads, but are suitable for heavy loads and offer high axial rigidity.

Spherical roller thrust bearings contain convex rollers that make them self-aligning and unaffected by mounting error and shaft deflection.
Machined brass cages come standard, though the E-type uses a pressed steel cage for higher load capacity.

Cylindrical Roller Bearings – EW Series
מיסב גלילים חביתוניים סדרת EW

  • High radial load capacity
  • High speed applications
  • High strength pressed steel, machined brass or polyamide cage
  • Low noise & heat generation

Single Row Deep Groove Ball Bearings – HR Series
מיסב כדורי מסדרת HR

  • Special internal design
  • Bigger rolling elements.
  • Increased dynamic load rating
  • Increased life in operation
  • Interchangeable with the standard range
  • Extra clean Z steel as standard

Angular Contact Ball Bearings
מיסב כדורי זוויתי (חצי-לחץ) בעל שורה אחת

NSK’s comprehensive range of angular contact ball bearings has been designed to meet the ever-evolving requirements of equipment manufacturers.
Angular contact ball bearings feature a contact angle that sustains significant axial loads in one direction at the same time as radial loads.
Since an axial component is generated when radial load is applied, these bearings are typically used in pairs or multi-bearing sets.

Thrust Ball Bearings
מיסבי לחץ (כדורי / גלילי)

Thrust ball bearings are designed to take axial (thrust) loads at high speeds, but they cannot take any radial loads.
These bearings feature bearing washers with raceway grooves in which the balls move.

Needle Roller Bearings
מיסבי מחטים

Needle roller bearings (sometimes called “needle bearings”) use long and narrow cylindrical rollers that sometimes exceed JIS/ISO size ranges.
They are categorized as thrust or radial bearings based on which load direction they support.
Radial types include drawn-cup and solid types, as well as application-specific track rollers (cam and roller followers).
Thrust needle and thrust roller bearings respond to axial load needs.

Spherical Roller Bearings
מיסב גלילים מתכוונן (ספריקלי)

Spherical roller bearings are available in EA, C, CD, and CA types designed for high load capacity. Types EA, C, and CD have pressed steel cages, while CA uses machined brass cages.
All EA types are high-performance standard NSKHPS Series bearings.
NSKHPS Series bearings have especially high load capacity, high limiting speeds, and excellent performance at temperatures up to 200°C.

Tapered Roller Bearings
מיסב גלילים קוני

  • Inch & metric sizes
  • Standard steel / carburised steel / HTF treatment
  • Custom-made sets with spacers

Cylindrical Roller Bearings
מיסב גלילים

Cylindrical roller bearings (CRBs) have a simple structure with their cylindrical rollers in linear contact with the raceways.

They offer high load capacity under primarily radial loads.
Low friction between the rollers and ring ribs makes these bearings suited for high speed rotation

מיסבים ורכיבי הנעה לתעשיית ייצור הנייר ורכיבים נלווים

בשנים האחרונות ישנה עדות לעליה ניכרת ביכולות הייצור של תעשיית הנייר והמוצרים הנלווים לו, באמצעות שכלול טכנולוגיות והגברת מהירות המכונות המשמשות בתהליך הייצור במטרה ליעלו.
על מנת למנוע השבתת ייצור וצורך בהתמודדות עם שירות תחזוקה טכני, הלקוחות בתחום תעשיה זו דורשים אמינות גבוהה לכלל המסבים והרכיבים המכאניים במכונותיהם.
חברת NSK פיתחה מגוון מוצרים הבאים לתת מענה אופטימלי לדרישה זו והינם בשימוש בכל מגדרי תעשיית ייצור הנייר.

בתעשיית הנייר בולטות שתי משפחות מיסבים מבית NSK:

  • TL (Tough and Long Life) סדרת מיסבים אשר פותחה במיוחד למייבשים, מיסבים אלו הם תוצר של התמחות NSK לרבות הניסיון הרב והידע בביצוע טיפולים תרמיים מיוחדים.
  • NSK-HPS™ High Performance Standard Bearings: מיסבים גליליים מתכווננים (חביתוניים) המהווים תוצר של הידע, היכולות וחומרי הגלם של NSK.

המסבים הקיימים במייבשים של מכוונות הייצור חשופים לתנאי טמפרטורה גבוהה ולחות בשל הקיטור העובר דרך הגלילים.
כתוצאה מכך קיים הצורך להתמודד עם נזקים העלולים להגרם כתוצאה מתנאי סביבה זו:

  • שחיקה מוקדמת כתוצאה מאי סיכוך הולם בשל אי התאמה
  • סימני זחילה וחריצה כתוצאה מעבודה בסביבת טמפרטורה גבוהה לאורך זמן
  • שבר בטבעת הפנימית כתוצאה מהתפשטות תרמית לא אחידה בשל הבדלי טווחי טמפרטורות.

סדרת מיסבי ה TL של חברת NSK הינה בעלת מאפייני חוזק גבוהים יותר כתוצאה משימוש מושכל בחומרי גלם איכותיים וטיפולים תרמיים מיוחדים.
מיסבים אלו עמידים יותר בפני כשלים תחת סביבת עבודה תובענית זו.

Ball Bearing Units
בתי מיסב

NSK ball bearing units combine a bearing, housing, and sealing components into a standardized form used in the key parts of equipment.
They are versatile and easy to use.
Using a ball bearing unit simplifies the surrounding structure and makes mounting and maintenance more efficient.
As they provide the proper alignment, bearing units help prevent moment loads caused by mounting error.
Bearing units can also be easily mounted on the machine base or side walls so they can be used in all kinds of places, including frame structures.

Thrust Roller Bearings
מיסבי לחץ (כדורי / גלילי)

Available with cylindrical or spherical rollers, NSK’s thrust roller bearings sustain only axial loads, but are suitable for heavy loads and offer high axial rigidity.

Spherical roller thrust bearings contain convex rollers that make them self-aligning and unaffected by mounting error and shaft deflection.
Machined brass cages come standard, though the E-type uses a pressed steel cage for higher load capacity.

Cylindrical Roller Bearings – EW Series
מיסב גלילים חביתוניים סדרת EW

  • High radial load capacity
  • High speed applications
  • High strength pressed steel, machined brass or polyamide cage
  • Low noise & heat generation

Ball Screw Support Bearings
מיסב לחץ זוויתי לבורג כדורי

High-precision angular contact thrust ball bearings for precision ball screws are designed for a wide variety of applications with a range of high rigidity and high load capacity series available.

Single Row Deep Groove Ball Bearings – HR Series
מיסב כדורי מסדרת HR

  • Special internal design
  • Bigger rolling elements.
  • Increased dynamic load rating
  • Increased life in operation
  • Interchangeable with the standard range
  • Extra clean Z steel as standard

Angular Contact Ball Bearings
מיסב כדורי זוויתי (חצי-לחץ) בעל שורה אחת

NSK’s comprehensive range of angular contact ball bearings has been designed to meet the ever-evolving requirements of equipment manufacturers.
Angular contact ball bearings feature a contact angle that sustains significant axial loads in one direction at the same time as radial loads.
Since an axial component is generated when radial load is applied, these bearings are typically used in pairs or multi-bearing sets.

Thrust Ball Bearings
מיסבי לחץ (כדורי / גלילי)

Thrust ball bearings are designed to take axial (thrust) loads at high speeds, but they cannot take any radial loads.
These bearings feature bearing washers with raceway grooves in which the balls move.

Needle Roller Bearings
מיסבי מחטים

Needle roller bearings (sometimes called “needle bearings”) use long and narrow cylindrical rollers that sometimes exceed JIS/ISO size ranges.
They are categorized as thrust or radial bearings based on which load direction they support.
Radial types include drawn-cup and solid types, as well as application-specific track rollers (cam and roller followers).
Thrust needle and thrust roller bearings respond to axial load needs.

Spherical Roller Bearings
מיסב גלילים מתכוונן (ספריקלי)

Spherical roller bearings are available in EA, C, CD, and CA types designed for high load capacity. Types EA, C, and CD have pressed steel cages, while CA uses machined brass cages.
All EA types are high-performance standard NSKHPS Series bearings.
NSKHPS Series bearings have especially high load capacity, high limiting speeds, and excellent performance at temperatures up to 200°C.

Tapered Roller Bearings
מיסב גלילים קוני

  • Inch & metric sizes
  • Standard steel / carburised steel / HTF treatment
  • Custom-made sets with spacers

Cylindrical Roller Bearings
מיסב גלילים

Cylindrical roller bearings (CRBs) have a simple structure with their cylindrical rollers in linear contact with the raceways.

They offer high load capacity under primarily radial loads.
Low friction between the rollers and ring ribs makes these bearings suited for high speed rotation

להלן מידע לגבי יחידות גירוז ושימון אוטומטי לתעשיית ייצור נייר ורכיביו:
מגרזת אוטומטית – משמנת אוטומטית, תוצרת סימטק שוויץ , Simalube – the automatic single-point lubricator:

לחצו על הקישורים לקבלת מידע נוסף:

https://www.bearing.co.il/lubricator.aspx

https://www.bearing.co.il/simatec.aspx

מיסבים למשאבות ומדחסים

אספקת מיסבים ורכיבי הנעה עבור משאבות ומדחסים במגוון תעשיות:

  • תעשייה כימית
  • תעשיית הנייר
  • תחום ההשקיה
  • תעשיית המזון
  • מיסבים עבור מדחסי ציוד מפעלים
  • מיסבים עבור מדחס ציוד אספקת אוויר עבור הנדסה אזרחית / בניה
  • מיסבים עבור מדחס מיזוג אוויר
  • מיסבים עבור מדחס מוכוונת קירור

המיסבים, בהיותם תומכים בתנועה הסיבובית במערכות המשאבות והמדחסים מהווים למעשה את הרכיב הקריטי ביותר במערכת.
דרישות עמידות:

  • ידידותיים לסביבה
  • אמינות גבוהה ביותר
  • יעילים ובעלי צריכת אנרגיה נמוכה
  • בעלי דרישות תחזוקה נמוכות

חברת NSK המתכננת את מוצריה ברמה הגבוהה ביותר, מספקת מגוון מוצרים בעלי אורך חיים ממושך תוך יכולת עמידה בפני עומסים גבוהים במיוחד.

המטרה היא הגעה לצריכת אנרגיה נמוכה תוך שימור דרישות תחזוקה נמוכות.

בהקשר זה מיסבים המשמשים במשאבות ומדחסים נדרשים:

  • לייצר חום נמוך
  • להיות בעלי אורך חיים ארוך
  • לעמוד בפני תנאי סביבה קיצוניים
  • למזער רעשים
  • להיות בעלי משטר הרעדה נמוך

NSK מספקת מענה עבור כל דרישות אלה באמצעות חוזקתם בתכן, פיתוח, חומרי הגלם, טכנולוגיית ייצור ובזכות ניסיונם רב השנים בייצור ופיתוח מיסבים.

חברת NSK פיתחה את סדרת ELCOMP, מיסבים למדחסים בעלי עמידות גבוהה בפני שמנים וכימיקלים, מיסבי מגע זוויתיים בעלי 2 שורות ו NSK-HPS (high-performance standard) מיסבי חצי לחץ זוויתיים להגברת הביצועים ואמינות המשאבה.

פיתוחים אלה מאפשרים את הגדלת משך חיי המוצר, הקטנתו והשגת אמינות גבוהה יותר.

Ball Bearing Units
בתי מיסב

NSK ball bearing units combine a bearing, housing, and sealing components into a standardized form used in the key parts of equipment.
They are versatile and easy to use.
Using a ball bearing unit simplifies the surrounding structure and makes mounting and maintenance more efficient.
As they provide the proper alignment, bearing units help prevent moment loads caused by mounting error.
Bearing units can also be easily mounted on the machine base or side walls so they can be used in all kinds of places, including frame structures.

Thrust Roller Bearings
מיסבי לחץ (כדורי / גלילי)

Available with cylindrical or spherical rollers, NSK’s thrust roller bearings sustain only axial loads, but are suitable for heavy loads and offer high axial rigidity.

Spherical roller thrust bearings contain convex rollers that make them self-aligning and unaffected by mounting error and shaft deflection.
Machined brass cages come standard, though the E-type uses a pressed steel cage for higher load capacity.

Cylindrical Roller Bearings – EW Series
מיסב גלילים חביתוניים סדרת EW

  • High radial load capacity
  • High speed applications
  • High strength pressed steel, machined brass or polyamide cage
  • Low noise & heat generation

Single Row Deep Groove Ball Bearings – HR Series
מיסב כדורי מסדרת HR

  • Special internal design
  • Bigger rolling elements.
  • Increased dynamic load rating
  • Increased life in operation
  • Interchangeable with the standard range
  • Extra clean Z steel as standard

Angular Contact Ball Bearings
מיסב כדורי זוויתי (חצי-לחץ) בעל שורה אחת

NSK’s comprehensive range of angular contact ball bearings has been designed to meet the ever-evolving requirements of equipment manufacturers.
Angular contact ball bearings feature a contact angle that sustains significant axial loads in one direction at the same time as radial loads.
Since an axial component is generated when radial load is applied, these bearings are typically used in pairs or multi-bearing sets.

Thrust Ball Bearings
מיסבי לחץ (כדורי / גלילי)

Thrust ball bearings are designed to take axial (thrust) loads at high speeds, but they cannot take any radial loads.
These bearings feature bearing washers with raceway grooves in which the balls move.

Needle Roller Bearings
מיסבי מחטים

Needle roller bearings (sometimes called “needle bearings”) use long and narrow cylindrical rollers that sometimes exceed JIS/ISO size ranges.
They are categorized as thrust or radial bearings based on which load direction they support.
Radial types include drawn-cup and solid types, as well as application-specific track rollers (cam and roller followers).
Thrust needle and thrust roller bearings respond to axial load needs.

Ball Screw Support Bearings
מיסב לחץ זוויתי לבורג כדורי

High-precision angular contact thrust ball bearings for precision ball screws are designed for a wide variety of applications with a range of high rigidity and high load capacity series available.

Spherical Roller Bearings
מיסב גלילים מתכוונן (ספריקלי)

Spherical roller bearings are available in EA, C, CD, and CA types designed for high load capacity. Types EA, C, and CD have pressed steel cages, while CA uses machined brass cages.
All EA types are high-performance standard NSKHPS Series bearings.
NSKHPS Series bearings have especially high load capacity, high limiting speeds, and excellent performance at temperatures up to 200°C.

Tapered Roller Bearings
מיסב גלילים קוני

  • Inch & metric sizes
  • Standard steel / carburised steel / HTF treatment
  • Custom-made sets with spacers

Cylindrical Roller Bearings
מיסב גלילים

Cylindrical roller bearings (CRBs) have a simple structure with their cylindrical rollers in linear contact with the raceways.

They offer high load capacity under primarily radial loads.
Low friction between the rollers and ring ribs makes these bearings suited for high speed rotation

מיסבים ורכיבי הנעה לתעשיית ייצור מלט, מכונות כרייה חציבה ובנייה

פעולות כרייה הינן חשובות והכרחיות לשיפור ושימור אורח החיים המודרני. בין היתר הן מספקות משאבים ליצירת חשמל, כבישים ובנייה.

המכרות והמחצבות בדרך כלל ממוקמים הרחק מאזור מגורים. בעולם שכיח למצוא מכרות הממוקמות בהרים, באזורים מדבריים ואפילו מאות מטרים מתחת לפני האדמה. גם בישראל ממוקמים אתרי כרייה וחציבה במגוון מקומות בארץ.

הציוד המכאני המשמש לכריה נדרש לעיתים רבות לעבוד ללא הפסקה 24 שעות ביממה ו7 ימים בשבוע. תהליך הכרייה מתחיל בשבירה וריסוק של אבנים וסלעים וממשיך בעיבוד מינראליים תוך שימוש בטכנולוגיות חיתוך, סינון, מידור ושינוע.

בדומה לכרייה גם לתעשיית הבניה ישנה חשיבות מכרעת לקיום אורך חיינו המודרני.

תעשיה זו הופכת את חיינו לנוחה ויעילה יותר, בין היתר באמצעות הקמת גורדי שחקים, כבישים, מערכות ביוב ועוד.

ציוד עזר מכאני המשמש לבניה, כגון מנופים, טרקטורים, שופלים ומכוונות צמ”ה נוספות, משמשים למגוון יישומים בתחום הבניה.

תנאי סביבת העבודה בהם נדרשים לעמוד המיסבים וציוד השינוע בתעשיית הכרייה והבניה, הינם תובעניים ביותר והרכיבים נדרשים לספק מענה מכאני מיטבי תחת עומסים קיצוניים :

– עומסים גבוהים רגעיים ורציפים
– עומסים קלים במהירות סיבוב גבוהה
– עומסים גבוהים במהירות סיבוב נמוכה

בנוסף לדרישות עמידות מרבית, יעילות ואמינות חסרת פשרות, תוכנות אלה הכרחיות בענפי הכרייה ובניה.

כל כשל או תקלה בציוד על רכיביו עלול להיות בעל השלכות חמורות ואף בלתי הפיכות עבור תהליך הייצור. תיקון הכשל עלול להיות כרוך במאמץ רב משאבים ועלויות גבוהות.

מגוון לקוחות NSK בתחומי אלו, מכתיבים את הצורך במיסבים ורכיבי הנעה בעלי עמידה בתנאי סביבה ותנאי עבודה מאתגרים ביותר ולספק אמינות גבוהה ביותר.

לצורך מתן מענה מיטבי לדרישות אלו , חברת NSK משלבת את ידע טכנולוגי רב שנים, יחד עם הניסיון והנצילות של חומרי הגלם וחומרי הסיכוך המיוחדים.

כפועל יוצא של הצרכים המיוחדים בענף זה, חברת NSK מספקת ללקוחותיה מיסבים ורכיבי הנעה בעלי עמידות ואורך חיים יוצאים מן הכלל.

NSK ניסיון וטכנולוגיה

NSKHPS™ High Performance Standard Bearings for Industrial Machinery Spherical Roller Bearings

בנוסף למימוש תכן עדכני עבור כלוב המיסב ופני שטח הגלילים סדרה זו של מיסבים גליליים עושה שימוש בחומרי גלם מתקדמים ביותר, המאפשרים יכולת העמסה גדולה ובהתאם לכך גם הגדלת אורך חיי המיסב ורכיבי ההנעה הנלווים.

Ball Bearing Units
בתי מיסב

NSK ball bearing units combine a bearing, housing, and sealing components into a standardized form used in the key parts of equipment.
They are versatile and easy to use.
Using a ball bearing unit simplifies the surrounding structure and makes mounting and maintenance more efficient.
As they provide the proper alignment, bearing units help prevent moment loads caused by mounting error.
Bearing units can also be easily mounted on the machine base or side walls so they can be used in all kinds of places, including frame structures.

Thrust Roller Bearings
מיסבי לחץ (כדורי / גלילי)

Available with cylindrical or spherical rollers, NSK’s thrust roller bearings sustain only axial loads, but are suitable for heavy loads and offer high axial rigidity.

Spherical roller thrust bearings contain convex rollers that make them self-aligning and unaffected by mounting error and shaft deflection.
Machined brass cages come standard, though the E-type uses a pressed steel cage for higher load capacity.

Cylindrical Roller Bearings – EW Series
מיסב גלילים חביתוניים סדרת EW

  • High radial load capacity
  • High speed applications
  • High strength pressed steel, machined brass or polyamide cage
  • Low noise & heat generation

Ball Screw Support Bearings
מיסב לחץ זוויתי לבורג כדורי

High-precision angular contact thrust ball bearings for precision ball screws are designed for a wide variety of applications with a range of high rigidity and high load capacity series available.

Single Row Deep Groove Ball Bearings – HR Series
מיסב כדורי מסדרת HR

  • Special internal design
  • Bigger rolling elements.
  • Increased dynamic load rating
  • Increased life in operation
  • Interchangeable with the standard range
  • Extra clean Z steel as standard

Angular Contact Ball Bearings
מיסב כדורי זוויתי (חצי-לחץ) בעל שורה אחת

NSK’s comprehensive range of angular contact ball bearings has been designed to meet the ever-evolving requirements of equipment manufacturers.
Angular contact ball bearings feature a contact angle that sustains significant axial loads in one direction at the same time as radial loads.
Since an axial component is generated when radial load is applied, these bearings are typically used in pairs or multi-bearing sets.

Thrust Ball Bearings
מיסבי לחץ (כדורי / גלילי)

Thrust ball bearings are designed to take axial (thrust) loads at high speeds, but they cannot take any radial loads.
These bearings feature bearing washers with raceway grooves in which the balls move.

Needle Roller Bearings
מיסבי מחטים

Needle roller bearings (sometimes called “needle bearings”) use long and narrow cylindrical rollers that sometimes exceed JIS/ISO size ranges.
They are categorized as thrust or radial bearings based on which load direction they support.
Radial types include drawn-cup and solid types, as well as application-specific track rollers (cam and roller followers).
Thrust needle and thrust roller bearings respond to axial load needs.

Spherical Roller Bearings
מיסב גלילים מתכוונן (ספריקלי)

Spherical roller bearings are available in EA, C, CD, and CA types designed for high load capacity. Types EA, C, and CD have pressed steel cages, while CA uses machined brass cages.
All EA types are high-performance standard NSKHPS Series bearings.
NSKHPS Series bearings have especially high load capacity, high limiting speeds, and excellent performance at temperatures up to 200°C.

Tapered Roller Bearings
מיסב גלילים קוני

  • Inch & metric sizes
  • Standard steel / carburised steel / HTF treatment
  • Custom-made sets with spacers

Cylindrical Roller Bearings
מיסב גלילים

Cylindrical roller bearings (CRBs) have a simple structure with their cylindrical rollers in linear contact with the raceways.

They offer high load capacity under primarily radial loads.
Low friction between the rollers and ring ribs makes these bearings suited for high speed rotation

להלן מידע לגבי יחידות גירוז ושימון אוטומטי לתעשיית ייצור נייר ורכיביו:
מגרזת אוטומטית – משמנת אוטומטית, תוצרת סימטק שוויץ , Simalube – the automatic single-point lubricator :

לחצו על הקישורים לקבלת מידע נוסף:

https://www.bearing.co.il/lubricator.aspx

https://www.bearing.co.il/simatec.aspx

שניצקי ארצי בע”מ – מסבים ורכיבי הנעה לאופנועים

אופנועים מודרניים מכילים מספר רב של מיסבים. אופנוע בודד עשוי להכיל בין 30 ל 50 מיסבים. המיסבים ויתר רכיבי ההנעה הם אשר מאפשרים השגת תנועה חלקה ואמינה של כלל מערכות האופנוע לאורך שנים רבות. מיסוב גלגלים, מצמדים, רכיבי מערכות הצתה, גל ארכובה, גל זיזים ועוד… לביצועי המיסבים באופנוע ישנה השפעה ישירה על אופן נסיעת הרכב, עמידות לאורך זמן, צריכת דלק והבטיחות. היכולות הנדרשות ממסבי אופנועים כוללות בין היתר את הצורך בתנועה חלקה, התמודדות עם חיכוך וויברציות, ואמינות לאורך טווח רב של שנים. יכולות אלה משפיעות בין היתר על צריכת הדלק והבטיחות, ומשפיעות באופן ישיר על חיי המשתמשים ברכב ועל על הסביבה. יצרנית עולמית כגון חברת NSK אשר בסיסה ביפן, מתחשבת בדרישות ובצרכים אלה בעת תכנון וייצור המיסבים ורכיבי ההנעה. דבר זה נעשה תוך שיתוף פעולה מלא והדוק עם יצרני האופנועים. החברה שמה לה למטרה להמשיך ולהשקיע בתחומי המחקר והפיתוח ולספק מגוון מיסבים איכותיים ואמינים.

Thrust Roller Bearings
מיסבי לחץ (כדורי / גלילי)

Available with cylindrical or spherical rollers, NSK’s thrust roller bearings sustain only axial loads, but are suitable for heavy loads and offer high axial rigidity.

Spherical roller thrust bearings contain convex rollers that make them self-aligning and unaffected by mounting error and shaft deflection.
Machined brass cages come standard, though the E-type uses a pressed steel cage for higher load capacity.

Cylindrical Roller Bearings – EW Series
מיסב גלילים סדרת EW

  • High radial load capacity
  • High speed applications.
  • High strength pressed steel, machined brass or polyamide cage
  • Low noise & heat generation

Single Row Deep Groove Ball Bearings – HR Series
מיסב כדורי מסדרת HR

  • Special internal design
  • Bigger rolling elements.
  • Increased dynamic load rating
  • Increased life in operation
  • Interchangeable with the standard range
  • Extra clean Z steel as standard

Angular Contact Ball Bearings
מיסב כדורי זוויתי (חצי-לחץ) שורה אחת

NSK’s comprehensive range of angular contact ball bearings has been designed to meet the ever-evolving requirements of equipment manufacturers.
Angular contact ball bearings feature a contact angle that sustains significant axial loads in one direction at the same time as radial loads.
Since an axial component is generated when radial load is applied, these bearings are typically used in pairs or multi-bearing sets.

Thrust Ball Bearings
מיסבי לחץ (כדורי / גלילי)

Thrust ball bearings are designed to take axial (thrust) loads at high speeds, but they cannot take any radial loads.
These bearings feature bearing washers with raceway grooves in which the balls move.

Needle Roller Bearings
מיסבי מחטים

Needle roller bearings (sometimes called “needle bearings”) use long and narrow cylindrical rollers that sometimes exceed JIS/ISO size ranges.
They are categorized as thrust or radial bearings based on which load direction they support.
Radial types include drawn-cup and solid types, as well as application-specific track rollers (cam and roller followers).
Thrust needle and thrust roller bearings respond to axial load needs.

Spherical Roller Bearings
מיסב גלילים מתכוונן (ספריקלי)

Spherical roller bearings are available in EA, C, CD, and CA types designed for high load capacity. Types EA, C, and CD have pressed steel cages, while CA uses machined brass cages.
All EA types are high-performance standard NSKHPS Series bearings.
NSKHPS Series bearings have especially high load capacity, high limiting speeds, and excellent performance at temperatures up to 200°C.

Tapered Roller Bearings
מיסב גלילים קוני

  • Inch & metric sizes
  • Standard steel / carburised steel / HTF treatment
  • Custom-made sets with spacers

Cylindrical Roller Bearings
מיסב גלילים

Cylindrical roller bearings (CRBs) have a simple structure with their cylindrical rollers in linear contact with the raceways.

They offer high load capacity under primarily radial loads.
Low friction between the rollers and ring ribs makes these bearings suited for high speed rotation

להלן מבחר קטלוגים להורדה:

מיסבים לאופניים

NSK מובילה בעולם בתחום המיסבים לכלי רכב, וביניהם גם לרכבים דו גלגליים.

חברת NSK מציעה מגוון רחב של פתרונות מיסוב לאופניים ולאופנועים, לרבות מיסבים מפלדות מיסבים, פלדות אל-חלד, מיסבים קרמיים, מיסבים בדרגת דיוק גבוהה לספורט הדו גלגלי.

המסבים הסטנדרטיים מיוצרים מפלדה יפנית ברמת ניקיון גבוהה ואיכותית במיוחד, דבר אשר מקנה למיסבים עמידות בעומסים רדיאליים ואקסיאליים (ציריים) גבוהים במיוחד ומספקים מענה לדרישות העולות בתחום הספורט הדו גלגלי ועמידות בפני נהיגה בתנאי שטח קיצוניים.

ניתן להשיג מיסבים אשר מצוידים באטימת גומי מעולה/ VV DDU או בעלי הגנת סגירת מתכת ZZ.

ביישומים בהם נדרשת אטימה איכותית במיוחד, טכנולוגיית האטימה DDU של NSK, מספקת אטימה יעילה ביותר המבוססת פטנט Labyrinth Seal, אשר משלב תכונות אטימה יוצאות דופן יחד עם חיכוך נמוך במיוחד.

בנוסף, ניתן להשיג מגוון רחב מאוד של מיסבים מפלדת אלחלד ומחומרים איכותיים ועמידים ביותר.

מידע נוסף לגבי ישומי NSK באופניים:

https://www.nskeurope.com/en/company/news-search/2016-press/hybrid-bike-motorbike-bearings.html

להלן דוגמאות למיסבים לאופניים, מיסבים מתוצרת ZEN:

1. מסבי כידון:

2. מסבי גלגלים:

3. מיסבים קרמיים:

1. מסבי כידון:

2. מסבי גלגלים:

3. מיסבים קרמיים:

Thrust Roller Bearings
מיסבי לחץ (כדורי / גלילי)

Available with cylindrical or spherical rollers, NSK’s thrust roller bearings sustain only axial loads, but are suitable for heavy loads and offer high axial rigidity.

Spherical roller thrust bearings contain convex rollers that make them self-aligning and unaffected by mounting error and shaft deflection.
Machined brass cages come standard, though the E-type uses a pressed steel cage for higher load capacity.

Single Row Deep Groove Ball Bearings – HR Series
מיסב כדורי מסדרת HR

  • Special internal design
  • Bigger rolling elements.
  • Increased dynamic load rating
  • Increased life in operation
  • Interchangeable with the standard range
  • Extra clean Z steel as standard

Angular Contact Ball Bearings
מיסב כדורי זוויתי (חצי-לחץ) בעל שורה אחת

NSK’s comprehensive range of angular contact ball bearings has been designed to meet the ever-evolving requirements of equipment manufacturers.
Angular contact ball bearings feature a contact angle that sustains significant axial loads in one direction at the same time as radial loads.
Since an axial component is generated when radial load is applied, these bearings are typically used in pairs or multi-bearing sets.

Thrust Ball Bearings
מיסבי לחץ (כדורי / גלילי)

Thrust ball bearings are designed to take axial (thrust) loads at high speeds, but they cannot take any radial loads.
These bearings feature bearing washers with raceway grooves in which the balls move.

Needle Roller Bearings
מיסבי מחטים

Needle roller bearings (sometimes called “needle bearings”) use long and narrow cylindrical rollers that sometimes exceed JIS/ISO size ranges.
They are categorized as thrust or radial bearings based on which load direction they support.
Radial types include drawn-cup and solid types, as well as application-specific track rollers (cam and roller followers).
Thrust needle and thrust roller bearings respond to axial load needs.

Spherical Roller Bearings
מיסב גלילים מתכוונן (ספריקלי)

Spherical roller bearings are available in EA, C, CD, and CA types designed for high load capacity. Types EA, C, and CD have pressed steel cages, while CA uses machined brass cages.

All EA types are high-performance standard NSKHPS Series bearings.
NSKHPS Series bearings have especially high load capacity, high limiting speeds, and excellent performance at temperatures up to 200°C.

Tapered Roller Bearings
מיסב גלילים קוני

  • Inch & metric sizes
  • Standard steel / carburised steel / HTF treatment
  • Custom-made sets with spacers

Cylindrical Roller Bearings
מיסב גלילים

Cylindrical roller bearings (CRBs) have a simple structure with their cylindrical rollers in linear contact with the raceways.

They offer high load capacity under primarily radial loads.
Low friction between the rollers and ring ribs makes these bearings suited for high speed rotation

להלן מבחר קטלוגים להורדה:

מיסבים ורכיבי הנעה לחקלאות

מגוון מיסבים ורכיבי הנעה למכונות חקלאיות.
יישומים חקלאיים מציבים אתגרים לא מבוטלים עבור שלל הרכיבים המכניים.
חדירת מזהמים, אבק, בוץ, לחות, רטט ועומסי הלם הם רק חלק ממכלול הגורמים עימם הרכיבים במכאניים נדרשים להתמודד.
המסבים ורכיבי ההנעה אותם אנו מספקים נועדו לתת מענה מתאים לאתגרים אלו.
מסבים ובתי מיסב מיוחדים לחקלאות, פלדות ופולימרים מיוחדים, פלדת אל חלד, אביזרי גירוז מיוחדים.

Deep Groove Ball Bearings
מיסב כדורי סטנדרטי מדויק

NSK manufactures a full range of deep groove ball bearings (DGBBs). These versatile bearings are the most common type and serve a wide variety of industries.
Besides radial loads, the bearings can take axial loads in both directions and offer low frictional torque and high-speed components ideal for applications requiring low noise and vibration

בתי מיסב
Bearing Units

  • Sealed single-row ball bearing in a Pillow block or flanged housing
  • NSK units feature “flingers” that keep contaminants away
  • Housings available in ductile cast iron, cast steel or stainless steel
  • Variety of shaft locking mechanisms

Cylindrical Roller Bearings – EW Series
מיסב גלילים חביתוניים סדרת EW

  • High radial load capacity
  • High speed applications
  • High strength pressed steel, machined brass or polyamide cage
  • Low noise & heat generation

Single Row Deep Groove Ball Bearings – HR Series
מיסב כדורי מסדרת HR

  • Special internal design
  • Bigger rolling elements.
  • Increased dynamic load rating
  • Increased life in operation
  • Interchangeable with the standard range
  • Extra clean Z steel as standard

Thrust Ball Bearings
מיסבי לחץ (כדורי / גלילי)

Thrust ball bearings are designed to take axial (thrust) loads at high speeds, but they cannot take any radial loads.
These bearings feature bearing washers with raceway grooves in which the balls move.

Needle Roller Bearings
מיסבי מחטים

Needle roller bearings (sometimes called “needle bearings”) use long and narrow cylindrical rollers that sometimes exceed JIS/ISO size ranges.
They are categorized as thrust or radial bearings based on which load direction they support.
Radial types include drawn-cup and solid types, as well as application-specific track rollers (cam and roller followers).
Thrust needle and thrust roller bearings respond to axial load needs.

Spherical Roller Bearings
מיסב גלילים מתכוונן (ספריקלי)

Spherical roller bearings are available in EA, C, CD, and CA types designed for high load capacity. Types EA, C, and CD have pressed steel cages, while CA uses machined brass cages.
All EA types are high-performance standard NSKHPS Series bearings.
NSKHPS Series bearings have especially high load capacity, high limiting speeds, and excellent performance at temperatures up to 200°C.

Tapered Roller Bearings
מיסב גלילים קוני

  • Inch & metric sizes
  • Standard steel / carburised steel / HTF treatment
  • Custom-made sets with spacers

Cylindrical Roller Bearings
מיסב גלילים

Cylindrical roller bearings (CRBs) have a simple structure with their cylindrical rollers in linear contact with the raceways.

They offer high load capacity under primarily radial loads.
Low friction between the rollers and ring ribs makes these bearings suited for high speed rotation

מבחר נרחב של מיסבים לתעשייה ולחקלאות, זמינים במלאי מידי.

להלן מידע לגבי יחידות גירוז ושימון אוטומטי לתעשיית ייצור נייר ורכיביו:
מגרזת אוטומטית – משמנת אוטומטית, תוצרת סימטק שוויץ , Simalube – the automatic single-point lubricator :

לחצו על הקישורים לקבלת מידע נוסף:

https://www.bearing.co.il/lubricator.aspx

https://www.bearing.co.il/simatec.aspx

להלן מבחר קטלוגים להורדה:



מיסבים ואביזרי הנעה

bearing

חברת שניצקי ארצי בע"מ מתמחה בייבוא ושיווק של מיסבים, כדורי מסוע, מוצרי הנעה ליניארית ואביזרי הנעה נלווים.

החברה הינה מהוותיקות בתחומה בארץ, נוסדה בשנת 1978 ומאז משרתת נאמנה את לקוחותיה מכל תחומי התעשייה בארץ, במגזר הפרטי והציבורי.

אנו היבואנים והמפיצים של חברת NSK , חברת RHP, חברת Alwayse , חברת SYI וחברות נוספות.

ברשותנו מגוון רחב של מוצרים לרבות מיסבים מדויקים, מיסבים לסביבה מיוחדת, מיסבים מיניאטוריים, מיסבי מחטים, מיסבי גלילים, מיסבי לחץ, מיסבים ליניאריים, בתי מיסב, אטמים, כדוריות ומוצרי שינוע נלווים.

לחץ לקבלת מידע נוסף אודות NSK יצרן המיסבים המוביל בעולם.

תפריט מוצרים ראשי

תפריט נתונים טכניים

הנעה ליניארית מדויקת

לינארי

רכיבי הנעה ליניארית ומערכות הנעה ליניארית המספקים מענה לאתגרים הטכנולוגיים התובעניים ביותר.

מבין מוצרי ההנעה הליניארית ניתן להשיג : מסילות ליניאריות, ברגים כדוריים וברגים מוליכים, אקטואטורים ליניאריים, מוצרים בעלי גירוז עצמי, מערכות X-Y-Z ועוד.

הנעה ליניארית מתקדמת באיכות מעולה. מבחר דגמים הבאים לשרת מגוון צרכים בתעשיות השונות.


לחץ לקבלת מידע נוסף לינארי

כדורי מסוע - Alwayse Engineering

מיסב

חברת שניצקי ארצי בע''מ המשווקת והמפיצה הבלעדית של חברתEngineering Alwayse בישראל, יצרנית כדורי מסוע ומסועים הגדולה בעולם.

עם וותק של מעל 70 שנה, חברת Alwayse צברה מוניטין של מומחית עולמית בייצור כדורי מסוע, מסועים ואביזרים לשינוע חומרים וסחורות.

לרשות Alwayse עומד טווח הייצור המקיף והגדול ביותר של כדורי מסוע וחלקי מסוע מקרב כל היצרנים בעולם.
מעל ל 150 דגמים של כדורי מסוע ומעל 5000 ספציפיקציות שונות.

לחץ לקבלת מידע נוסף אודות היצרן

לחץ לקבלת מידע טכני

לחץ להצגת דגמי כדורי מסוע

קישור לאתר Alwayse Engineering בישראל

הצעת מחיר

מדריך לאבחון תקלות במיסבים
Doctor Bearing

מיסבים
זיהוי גורמי זנק אפשריים ומתן אמצעי נגד לטיפול בגורמי הכשל.
כניסה למדריך
הצגת סוגי תקלות .